Name: aggregate size testing with sieve grading
Uploaded: 2024-11-07T14:48:25.000Z
Duration: 1 min 19 s
Channel: JoVE

采用一组筛子自上而下按筛孔尺寸从大到小叠放，对集料进行筛分分析。
 粗骨料和细骨料所用筛子的尺寸各不相同。
称取一份风干的团聚体样品，通过机械或手动方式振荡筛分一段规定时间。
在此过程中，每个筛子会截留比其筛孔尺寸更粗的颗粒，同时允许更细的颗粒通过并进入下一个筛子。
记录每个筛子上截留的组分重量，以总质量的百分比表示，并以表格形式呈现。
从最细的筛子开始，依次向上计算通过每个筛子的累计百分比，并将结果四舍五入至最接近的整数百分比。
此外，采用半对数坐标图来表示通过百分比（y 轴）和筛孔尺寸（对数刻度的 x 轴）。
在此图中，绘制出每个筛孔尺寸对应的累计通过百分比，以获得级配曲线，该曲线表示集料颗粒基于其尺寸的分布情况。

筛分分析和级配曲线

Sieve Analysis and Grading Curves

筛分分析是一种用于确定骨料颗粒尺寸分布的方法。此过程涉及以下步骤:

<ol style="display: flex; flex-direction: column; gap: 10px;">
 <li>称量所需数量的干燥骨料样品。
 </li>
 <li>将称量的骨料通过一组方形开口的筛子进行筛选，这些筛子按孔径大小从大到小的顺序排列，最大的网眼位于顶部（表 1 的第 1 列）。
 </li>
 <li>摇晃或振动筛堆，以便根据大小对颗粒进行分类。
 </li>
 <li>筛分一定时间后，对每个筛子上保留的材料进行称重（表 1 第 2 列）。
 </li>
 <li>每个筛子上保留的颗粒重量以占样品总质量的百分比表示（表 1 第 3 列）。
 <img alt="Eq1" src="/files/ftp_upload/16871/16871%20_Equation_PT_001v2.svg" style="opacity: 0.9; text-align: center; height: 46px;">
 </li>
 <li>从最细的筛子开始向上计算通过每个筛子的累计百分比，精确到百分之一（表 1 第 4 列）。
 </li>
 <li>将级配曲线绘制在图表上（图 1），其中纵坐标值代表通过百分比（表 1 第 4 列），横坐标值表示筛网孔径（表 1 第 1 列），设置为对数刻度。
 </li>
</ol>

表 1:砂石筛分分析数据

<table style="text-align: center;" border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>第 1 列</td>
			<td>第 2 列</td>
			<td>第 3 列</td>
			<td>第 4 列</td>
		</tr>
		<tr>
			<td>ASTM 筛（筛孔尺寸）</td>
			<td>每个筛子上保留的重量（g）</td>
			<td>每个筛子上保留的重量百分比（％）</td>
			<td>每道筛累计通过率（%）</td>
		</tr>
		<tr>
			<td>⅜ 英寸（9.5 毫米）</td>
			<td>0</td>
			<td>0</td>
			<td>98+2 = 100</td>
		</tr>
		<tr>
			<td>4号（4.75毫米）</td>
			<td>10</td>
			<td>2</td>
			<td>88+10 = 98</td>
		</tr>
		<tr>
			<td>8号（2.36毫米）</td>
			<td>50</td>
			<td>10</td>
			<td>79+9 = 88</td>
		</tr>
		<tr>
			<td>16号（1.18毫米）</td>
			<td>45</td>
			<td>9</td>
			<td>61+18 = 79</td>
		</tr>
		<tr>
			<td>30号（600μ）</td>
			<td>90</td>
			<td>18</td>
			<td>29+32 = 61</td>
		</tr>
		<tr>
			<td>50号（300μ）</td>
			<td>160</td>
			<td>32</td>
			<td>10+19 = 29</td>
		</tr>
		<tr>
			<td>100 号（150μ）</td>
			<td>95</td>
			<td>19</td>
			<td>10</td>
		</tr>
		<tr>
			<td>底盘</td>
			<td>50</td>
			<td>10</td>
			<td></td>
		</tr>
		<tr>
			<td colspan="2">骨料总重量=500克</td>
			<td colspan="2"></td>
		</tr>
	</tbody>
</table>
<img alt="Figure 1" src="/files/ftp_upload/16871/16871_Figure_PT_001.jpg" style="opacity: 0.9; text-align: center;">
级配曲线在视觉上简化了粒度分布，对于确保骨料满足建筑项目所需的级配规范至关重要。

使用一组筛子从上到下按筛孔尺寸由大到小叠放，对集料进行筛分分析。  
尺寸 ...

Education

教育

JoVE Core

Civil Engineering

土木工程

Unit 1

第一单元

Aggregates and Water

骨料与水

KEY TERMS AND CONCEPTS

关键术语与概念

aggregate size testing with sieve grading

Aggregate size testing with sieve grading measures the particle size distribution of aggregate materials. It starts with a dried sample of aggregate that is weighed first. The sample is then sorted through a stack of square-opening sieves arranged from largest opening on top to smallest opening below.

The sieve stack is shaken or vibrated so the particles move through the openings by size. After a set time, the material left on each sieve is weighed. That weight is then written as a percentage of the total sample mass.

Next, the cumulative percentage passing each sieve is calculated to the nearest one percent. This value is found from the finest sieve and then moved upward through the stack. The data can be recorded for sieves such as ⅜ inch, No. 4, No. 8, No. 16, No. 30, No. 50, No. 100, and the bottom pan.

The grading curve is plotted on a graph using percentage passing on the vertical axis. The sieve aperture size is shown on the horizontal axis and uses a logarithmic scale. This curve gives a clear picture of particle size distribution and helps check whether aggregates meet grading requirements for construction projects.

Aggregate Size Testing with Sieve Grading

aggregate-size-testing-with-sieve-grading

unsoundness of aggregate due to volume change

unsoundness-of-aggregate-due-to-volume-change

Aggregate Durability in Freeze-Thaw Cycles

Aggregate durability can decline when volume changes damage the particles. Freezing and thawing, thermal change, and wetting and drying all place stress on aggregates. When unsound aggregates break down under these conditions, they can contribute to scaling, pop-outs, and cracking in concrete. Some aggregates are more vulnerable than others. Porous flints, cherts, and aggregates that contain clay minerals are especially prone to this kind of damage. Their internal structure can make them...

deleterious substances in aggregate

Testing Aggregate Impurities in Concrete

Aggregate impurities can lower the quality and durability of concrete. Organic matter, such as loam in sand, can interfere with cement hydration and weaken the bond between the aggregate and the cement paste. Organic impurities are often checked with a colorimetric test. In this test, the darkness of the solution after agitation shows the level of organic content. Clay and fine material can also coat aggregate particles and reduce the bond with the cement paste. The amount of clay and silt in...

sieve analysis and grading curves

Aggregate size testing with sieve grading measures the particle size distribution of aggregate materials. It starts with a dried sample of aggregate that is weighed first. The sample is then sorted through a stack of square-opening sieves arranged from largest opening on top to smallest opening below. The sieve stack is shaken or vibrated so the particles move through the openings by size. After a set time, the material left on each sieve is weighed. That weight is then written as a percentage...

fineness modulus

Fineness Modulus from Sieve Analysis

Fineness modulus is a numerical index used to describe how coarse or fine aggregate particles are. For sand, it is found from sieve analysis using a standard set of ASTM sieves. The result helps show whether the sample is finer or more coarse. To calculate fineness modulus, first record the weight of aggregate retained on each sieve and in the pan at the bottom. Then find the cumulative weight retained on each sieve. Next, express each cumulative weight as a percentage of the total sample...

types of aggregate grading

Aggregate Grading for Strong Concrete Mixes

Aggregate grading describes the particle size distribution in a sample of aggregate. It is important for making a concrete mix that has enough strength, reasonable workability, and minimal segregation. The right grading also helps concrete stay economical. There are four main types of aggregate gradation: well-graded, uniformly graded, gap-graded, and open-graded. Each type has a different pattern on a gradation curve, which shows how particle sizes are spread across sieve sizes. These...

maximum size of aggregate

How Aggregate Size Affects Concrete Mix

Aggregate size affects how concrete is mixed, placed, and strengthened. The maximum size of aggregate is defined by the sieve aperture that retains 15 percent or more of the particles in the sample. This size choice helps determine the concrete’s water demand, workability, and final strength. Larger aggregate particles reduce the surface area that must be covered by cement paste. As a result, they can lower the water needed in the mix. When the desired workability and richness are kept, this...

quality of water

Water Standards for Concrete Mixing

Water standards for concrete mixing help control strength and durability. Potable water is usually preferred. Even so, it should not contain too much sodium or potassium, because these salts can weaken concrete integrity. Water quality is judged by impurities such as dissolved solids, chlorides, and sulfates. The pH value is ideally between 6 and 8. Slightly acidic natural water may still be acceptable if it does not contain harmful organic matter or algae. Limits for these impurities depend...

testing water quality

Water Tests for Concrete Performance

Water tests for concrete performance help determine whether an uncertain water source is safe to use in cement and mortar. The main checks compare the water against de-ionized or distilled water benchmarks. Engineers look at both setting time and the compressive strength of mortar made with the test water. Standards set clear limits for these results. ASTM C1602 requires setting times to stay within 90 minutes of the control. BS 3146:1980 allows a 30-minute change in initial setting, while BS...

aggregates classification

Aggregate Types by Size, Weight, and Source

Aggregate types are grouped by size, petrographic characteristics, weight, and source. These categories help describe how different aggregates are identified and used in concrete. Size is one of the most common ways to classify them. Based on particle size, aggregates are either coarse or fine. Coarse aggregates are particles that do not pass through ASTM sieve No. 4. Fine aggregates are the particles that do pass through that sieve. Petrographic classification looks at shared mineral features.

shape and texture of coarse aggregate

How Aggregate Form Changes Concrete

Aggregate form affects how concrete mixes, packs, and bonds. Coarse aggregate is classified by the sharpness or roundness of its edges and corners. The main shapes are rounded, angular, elongated, and flaky. These shapes help show how the particles will behave in concrete. Rounded aggregates are fully shaped by attrition, which means they have been worn down by rubbing and impact. River gravel and seashore gravel are common examples. Angular aggregates, such as crushed rock, have clear edges...

bonding and strength of aggregate

How Aggregate Shape Affects Concrete Bond

Aggregate shape and surface texture affect how well concrete holds together. Rough, angular aggregates usually bond more strongly with the cement matrix than smooth, rounded ones. This stronger adhesion can help produce high-strength concrete. Angular aggregates also have a larger surface area. That gives the cement paste more area to grip, which improves the bond. Bond quality is hard to measure directly, and there is no single test that is accepted everywhere. A broken concrete sample can...

toughness and hardness of aggregate

Testing Aggregate Impact and Abrasion

Aggregate toughness and hardness are important for concrete used on pavement surfaces and industrial floors that must carry heavy loads. Toughness means an aggregate can resist failure from impact. Hardness means it can resist wear.

specific gravity of aggregate

Aggregate Pore Effects on Specific Gravity

Aggregate specific gravity depends on the pores inside the material. These pores may be permeable or impermeable, so the same aggregate can be described in more than one way. For this reason, specific gravity is grouped into bulk or gross specific gravity, apparent specific gravity, and absolute specific gravity. Bulk or gross specific gravity uses the mass of aggregate in the saturated surface-dry state. It is compared with the total volume of the aggregate, including both the solids and the...

bulk density of aggregate

How Aggregate Size Affects Bulk Density

Bulk density describes the mass of aggregate that fills a unit volume, including the empty spaces between particles. Those void spaces remain because aggregate particles cannot be packed so tightly that every gap disappears. In practice, bulk refers to the total volume of both the particles and the spaces around them. This measurement matters when aggregates are batched by volume. It also helps convert materials measured by mass into a volume-based quantity. Natural mineral aggregates such as...

porosity and absorption of aggregate

Aggregate Pore States and Water Uptake

Aggregate contains pores of different sizes, and those pores may be sealed inside the particle or open to the surface. Open pores let water enter the aggregate. Because aggregate makes up about three-quarters of concrete by volume, its porosity strongly affects the porosity of the finished concrete. Aggregate can also be described by its moisture state. When water fills every pore, the material is saturated and surface-dry. If it sits in dry air, some water evaporates and the aggregate becomes...

moisture content and bulking of aggregate

moisture-content-and-bulking-of-aggregate

How Aggregate Moisture Affects Concrete Mixes

Aggregate moisture affects concrete mixing by changing how much water must be added to the batch. Moisture content is the water coating the outside of aggregate that is in a saturated and surface-dry state. The total water in moist aggregate includes both moisture content and water absorption. When aggregates sit in stockpiles or are exposed to rain, they can take in moisture. That extra water must be counted during concrete batching so the water-to-cement ratio stays correct. The moisture...

key terms and concepts

Learn how sieve grading measures aggregate particle size distribution, from weighing the sample to plotting cumulative percentage passing on a grading curve.

Aggregate Size Testing with Sieve Grading | JoVE K12

JoVE Core Civil Engineering provides a foundational exploration of essential construction materials in civil engineering, focusing on bricks, stones, steel, wood, and concrete through easy-to-understand animated videos. This collection covers the properties, manufacturing processes, and practical applications of these materials. Additionally, the accompanied science-in-action videos demonstrate the research experiments performed in laboratories.

civil engineering

Aggregate Size Testing with Sieve Grading

Description

Transcript

Tags